Whetstone 2 Sided #300 #1000 Shun
SKU COOZINA
801174
SKU BRAND
DM-0708
€82.00
In stock
Caution Safety note:
Sharpen the knife by moving it back and forth, using the full length of the whetstone, with just enough force to lightly carry the weight of your arm without exerting too much pressure. When burrs appear, sharpen the other side in the same manner until burrs appear. For single bevel knives, see Figure 5 for the knife angle. Once burrs have developed along both sides, spread newspaper on a flat surface and rub both sides of the blade to remove the burrs.
- Only allow sharpening and grinding of cutting tools to be carried out by trained persons or under the supervision of such persons.
- Always use whetstones in accordance with the enclosed instructions for use and water them. Always work away from the body when sharpening.
- Only check the sharpness of the knife with the paper test and never with your hand or other parts of your body. Place the whetstones on a firm surface and ensure there is sufficient working space.
Grinding Instructions
Soak the whetstone in water until no air bubbles appear, and keep the whetstone constantly wet while sharpening. Place the whetstone on a dedicated stand or on a wet cloth to prevent it from moving.
Hold the knife as shown in Figure 1, and sharpen the knife while maintaining a constant angle to the whetstone. As shown in Figure 2, position the knife so that the angle between the knife's cutting edge and the whetstone is 45-60 degrees.
Double bevel knife: The angle between the whetstone and the knife should be about 15 degrees, as shown in Figure 3.
Single bevel knife: Place the knife on the whetstone as shown in Figure 4.
Hold the knife as shown in Figure 1, and sharpen the knife while maintaining a constant angle to the whetstone. As shown in Figure 2, position the knife so that the angle between the knife's cutting edge and the whetstone is 45-60 degrees.
Double bevel knife: The angle between the whetstone and the knife should be about 15 degrees, as shown in Figure 3.
Single bevel knife: Place the knife on the whetstone as shown in Figure 4.
Sharpen the knife by moving it back and forth, using the full length of the whetstone, with just enough force to lightly carry the weight of your arm without exerting too much pressure. When burrs appear, sharpen the other side in the same manner until burrs appear. For single bevel knives, see Figure 5 for the knife angle. Once burrs have developed along both sides, spread newspaper on a flat surface and rub both sides of the blade to remove the burrs.
In order to continue sharpening accurately, use a flattening stone to flatten the surface of the whetstone.
| BRAND | KAI |
|---|---|
| GRIT | 0-999, 1000-2999 |
Write Your Own Review
We ship by DHL, UPS and Aramex International.
Shipping costs and delivery service options are calculated after you add the products to your cart and fill in the order destination. Shipping costs depend on the weight, volume, value of the ordered products and the shipping destination.
Free shipping applies to orders over 200 euro with shipping weight/volume of less than 15kg to the following countires: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Monaco, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.
It also applies to orders over 200 euro with shipping weight/volume of less than 3kg to the following countires: Albania, Canada, Iceland, Serbia, Turkey, USA
VAT exemption EU
If you are located in the EU, making a purchase on behalf of a business and have a valid VAT number you are probably entitled to VAT exemption. In this case, contact us with your VAT number and your invoice details and after we are able to verify your VAT number, we will make sure not to charge VAT on your invoice and the VAT value will be refunded to you.
Duty Fees - Applicable only for countries outside the European Union
Please note that we are not responsible for any duty fees associated with customs at time of arrival to your country or any delays or other issues related to the destination country's custom offices.
The shipping company, DHL, may charge an extra fee for processing the custom clearance. If you have any doubts or concerns, please contact your local custom office and/or your local DHL branch before you place your order.
Returns
COOZINA accepts product replacements and returns under the following conditions:
i) Send us your replacement request within 30 days from delivery date.
ii) The products must be intact in their original packing and remain unused.
iii) The products must be accompanied by the corresponding sales document (e.g. sales receipt). iv) You assume the responsibility and transport charges for the return of the products to our address.
